DC 3D UV Resin – Flexible – Black – 1000g
9 in stock
RJHC70
R1,525.00 Incl. VAT
9 in stock
DC 3D UV Resin – Flexible – Black – 1000g
Technical Specification:
| Flexural modulus：// | Elongation at break：122.71% ±10% |
| Flexural strength ：40.82 MPa ±10% | Hardness(Shore D)：55-60 D ±10% |
| Yield point elongation： 0.86% ±10% | Maximum force point of deformation：69.49mm ±10% |
| Viscosity：50-150 MPa·s | Density：1.05—1.25 g/cm3 |
| Maximum pulling strength: 192.21N ±10% | Notched impact strength: 471 j/m ±10% |
| Tensile strength：4.62Mpa ±10% | |
| Tensile modulus：3.33 Mpa ±10% |
Recommended Print Settings:
| Print Settings | |||||||||
| Layer Height (mm) | Bottom Exposure times (sec) | Layer Exposure times (sec) | Bottom Lift Distance (mm) | Lifting distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retract Speed (mm/min) | Rest Time after Retract (sec) | |
| Flexible Resin | 0.05 | 20-30 | 2.5-4.5 | 8-10
7-10”screen size, lifting distance: 10-12mm; |
8-10
7-10”screen size, lifting distance: 10-12mm; |
60 | 80 | 150 | 2-3 |
Precautions regarding the resin:
1. Storage environment: Store in cool dry place. Avoid sunlight. Recommended temperature at 25-30 degrees Celsius.
2. Preparation before use: Shake the resin well and leave it for 30 minutes before use. Allow to stand for 30 minutes to eliminate air bubbles that are generated during the shaking process.
3. Environmental conditions during use: The ambient temperature is recommended at 25-30 degrees Celsius. Avoid sunlight while printing.
| Weight | 1.14 kg |
|---|---|
| Dimensions | 10 × 10 × 30 cm |
Reviews
There are no reviews yet.